How to Setup Brother Printer on Computer: 3 Different Methods

Did you recently add a printer and are looking for the best methods to setup Brother printer on computer? Then, my lovely reader, you've come to the right place. Brother Inc. is a well-known company that produces many printers for buyers. To get the best printouts for your work, you need to setup your Brother printer with a computer. Besides, they support Windows, Mac, iOS & Android devices and are ideal for office & home use.

There are several methods you can consider to setup your Brother printer with its respective computer. Each method has different steps, so you must remain very focused while working on it. To save time and learn everything you need to know about the printer setup process, please refer to the section below.

Setup Brother Printer on Computer Using WPS

As shared with you in the opening lines of the blog, the most common and easiest method you can use for setting up the devices is the Wi-Fi Protected Setup (WPS) method. Have a look at the below steps and come across the process:

  1. Turn on your Brother printing device and use the arrow to select WLAN.
  2. After selecting the option, press OK and choose WLAN appearing on the screen.

 



  1. Enable WLAN by pressing the downward arrow, and the Wi-Fi button will start flashing.
  2. Now, take your router and hold on to the WPS button for a few seconds.

 



  1. After a while, you will see connected displays on your printer's screen.
  2. Finally, you can start taking out the printouts of your documents in the best quality.

 

Referring to the above steps will make it much easier to setup a printing device using this method.

 

Setup Brother Printer on Computer via a Wi-Fi Network

Apart from the WPS method, you also get the chance to setup a Brother printing device for the Windows/Mac computer via a wireless network. To start with the process, carefully examine the steps given below:

  1. Begin the setup process by switching on your printing device and pressing the Settings icon.

 



  1. Afterward, select the Wi-Fi, and you will see the Select Method list on your screen.
  2. Following this, tick the Setup Wizard and tap the Brother Wi-Fi option.

 



  1. Now, start typing the network password and press OK, which is visible inside the green box.

 


 

  1. At this point, you must ensure that your printing device and computer are on the same network.
  2. Bravo, you've successfully finished the Brother printer setup using Wi-Fi.

It's time to proceed with the last method, which will help you setup your printing device by referring to the USB cable.

 

Setup Brother Printer on Computer With a USB Cable

Further adding to the blog, a USB cable is the most common and everyone's favorite method for setting up Brother printer to desktop. With the process, take a look at the below-said instructions:

 

  1. First, you need to switch off your Brother printing device and unbox your USB cable.

 



 

  1. After unboxing it, take the B side of the cable and insert it into the printer's USB port.
  2. Next, insert the USB cable on another end into your computer port.

 



  1. Now, cross-check your cable has been inserted properly and turn on the printer.
  2. Conclude this method by transferring the file and taking out its printout. 

Final Words

In brief, one thing must have become very clear to this specific blog: setup Brother printer on computer is an easy task. You don't have a tech genius while performing any of these methods. No doubt, you need to prepare your respective devices before beginning the process. After finishing the process, you will be able to operate your printer without any issues and get the desired printout.

Question: How Do I Setup Brother Printer on My Computer?

Answer: You can easily setup your printer with your computer system. No doubt, you need to finish the method by taking all the steps. The names of the steps are given below:

  1. Wi-Fi network
  2. WPS push button
  3. Through password
  4. Configure settings
  5. USB cable

Question: Why Am I Not Able to Setup My Brother Printer on Computer?

Answer: Everything happens for a reason, and the same applies when you fail to setup a printer on a computer. The primary reasons that you might face setting up the printer to a computer are as follows:

       Outdated printer driver

       Faulty printer cable

       Defective USB cable

       Unstable connection

       Incompatible devices

Question: How Can I Setup Brother Printer on My Computer via an Ethernet Cable?

Answer: With the help of the below steps, you can easily setup your printing device to the desktop via Ethernet cable:

  1. Start the process by downloading the compatible printer driver on your computer.
  2. After the file is downloaded, tick the Next button.
  3. Now, choose the Wired Connection method that is visible on your screen.
  4. Next, follow the instructions appearing on your desktop screen.
  5. At last, your device setup process will come to an end.
Read more: 

                brother printer wireless setup 

setup.brother.com

support.brother.com

support.brother.com/windows


Comments

Popular posts from this blog

How to Reset Canon Printer: Discover 4 Best Methods

How to Reset Brother Printer: 4 Different Methods